LED cube chair for sale

Colors and 4 lighting way
Our LED cube chair supports 16 color options on the remote control by the free remote control. But if you choose to control the color with your phone, you can choose any color from thousands of RGB colors. Second, there are 4 modes to choose from, such fade, smooth, strobe and flash.

Control way of LED cube chair
We provide 4 central way to you. At first, the touch switch at the bottom of light panel. You just press it, it will be on and off. Second, the RF control, also known as “radio frequency,”RF, can work over much longer distances. Third, IR control, it is quick, efficient, and offers an ability to communicate a wide variety of commands. Its downside is that you always need line-of-sight for it to work properly. If something is in the way, you’re sunk. It also works over relatively short distances. Across a room is about as much as you can expect. At last, DMX control way, if you need to control a lot of glow LED cube chair, we also can provide the technology to meet you.

The material is the best LLDPE from Thailand
Our all glow LED cube chair are consist of plastic shell and inner light LED panel. In this plastic shell, all the shells are original the glow Linear low-density polyethylene (LLDPE). We import the best LLDPE from Thailand then create the glow illuminated LED cube chair by our equipments. The LLDPE is a substantially linear polymer (polyethylene), with significant numbers of short branches, commonly made by copolymerization of ethylene with longer-chain. LLDPE has higher tensile strength and higher impact and puncture resistance than does LDPE. The LLDPE known as third-generation polyethylene, has the properties of polyolefin resin, tensile strength, tear strength, environmental stress cracking resistance, low temperature resistance, heat resistance and puncture resistance are particularly superior, and has gained remarkable development – Wikipedia.

In addition, compared with ordinary LDPE and PE, their basic physical properties and forming characteristics are different due to their different molecular structures and melting rheological behaviors. So, our third generation polyethylene shell has three distinct advantages. First, our shells are more resistant to environmental stress cracking than other ordinary plastic shells. This also means that our LED cube chair are break-proof and anti-cold. You can work normally even if you’re at minus 40 degrees. Second, our LLDPE shell has good heat resistance. This means that our LED cube chair are less likely to break down in the summer heat. Third, our LLDPE plastic shell has good oil resistance.It means that our LED cube chair are easier to clean.

RGBW LED SMD 5050
Due to the uneven quality of LED lamp beads, the quality of all light-emitting LED cube chair varies greatly. There are many LED for us to choose. For example, DIP technology, SMD RGB technology, SMD RGB + W technology and our SMD RGBW technology. First， about the DIP technology light panel. Because there are no white beads directly in the DIP lamp panel, the lamp panel will consume much more energy. Secondly, the RGB SMD technology panel is the same as the previous DIP panel, which consumes a lot of energy. Third, the SMD RGB + W technology has a lamp bead that directly generates white light. However, there are too many welding points on this lamp panel, which wastes too much useful space on the lamp panel, resulting in too dark overall light.

Finally, our RGBW LED SMD 5050 perfectly solves the above problems. The RGBW LED SMD 5050 is actually a ‘quad’ chip, meaning it has for smaller chips in every SMD. So each white LED actually has four chips inside.5050s can also be used for color-changing LED tape, with red, green, blue and white chips inside each LED. By linking this type of RGB LED strip light to a controller, you can mix any shade of any color you choose. Therefore, our LED panel can save more electric energy to work longer time reach to 8~10 hours. At the same time, because of 4 in 1 RGBE LED, our light panel can accommodate more LEDs. So our light panel are lighter than ordinary light panel.

Solar powered charging way
Our LED Solar Panel LED cube chair are the best on solar energy system, voltage stability, bluetooth control and after sales service in Guangdong, China. A lot of factories can’t create solar LED cube chair, but luckily we can do it. Moreover, We provided customized service on lighting way, other charging way and the shelf.

Application
Make your place gorgeous sparkling:

1 Bar, KTV, Nightclub. This place needs the colorful light and it happens that we provide luminous bar.

2 Wine Party, Birthday Party. Anyway, lighting furniture is indispensable.

3 Exhibition, Show.

4 Hotel, Coffee Houses and so on. Using untraditional table to attract more guest.

Factory in China
We are a regular LED cube chair factory. The factory is in Guangdong, China. So our LED cube chair are much lower price than the peer in different countries. As long as you place an order, we can deliver the goods to you directly from the factory.

If you need LED cube chair, please contact us, you can send an inquiry at the bottom of the page. Due to the time difference, we may reply to you later, but generally not more than 6 hours.